Three-dimensional crystal plasticity finite element simulation of nanoindentation on aluminium alloy 2024

Ling Li, Luming Shen*, Gwénaëlle Proust, Charles K.S. Moy, Gianluca Ranzi

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

54 Citations (Scopus)

Abstract

Crystal plasticity finite element (CPFE) simulations of AA2024 under nanoindentation at six different depths are performed. The model parameters are calibrated through a representative volume element model fitting the stress-strain curves obtained from tensile tests performed at 0, 45 and 90° from the rolling direction. The simulated force-displacement curves and indentation moduli match the experimental data very well. The simulated results indicated that the local deformation in the indentation zone strongly depends on the grain properties. The significant difference in pile-up pattern due to the crystallographic orientation under the indenter is captured by the simulations. The simulation results for the stress and misorientation distributions reveal that low angle grain boundaries allow stress and misorientation continuity from grain to grain whereas high angle grain boundaries act as barriers, which causes stress concentrations at the grain boundaries. It appears that the proposed CPFE analysis approach can provide detailed three-dimensional microstructure information including misorientation map after deformation, which cannot be easily obtained from experiments.

Original languageEnglish
Pages (from-to)41-49
Number of pages9
JournalMaterials Science and Engineering: A
Volume579
DOIs
Publication statusPublished - 2013
Externally publishedYes

Keywords

  • Aluminium alloy 2024
  • Crystal plasticity
  • Finite element method
  • Nanoindentation
  • Representative volume element

Cite this