Development of the CMS detector for the CERN LHC Run 3

The CMS collaboration

doi:10.1088/1748-0221/19/05/P05064

Development of the CMS detector for the CERN LHC Run 3

The CMS collaboration

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Abstract

Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.

Original language	English
Article number	P05064
Journal	Journal of Instrumentation
Volume	19
Issue number	5
DOIs	https://doi.org/10.1088/1748-0221/19/05/P05064
Publication status	Published - 1 May 2024
Externally published	Yes

Keywords

Calorimeters
Large detector systems for particle and astroparticle physics
Particle tracking detectors

Access to Document

10.1088/1748-0221/19/05/P05064

Cite this

@article{68317ecc43a74f2cacbe64b92a78a276,

title = "Development of the CMS detector for the CERN LHC Run 3",

abstract = "Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.",

keywords = "Calorimeters, Large detector systems for particle and astroparticle physics, Particle tracking detectors",

author = "{The CMS collaboration} and A. Tumasyan and W. Adam and Andrejkovic, {J. W.} and T. Bergauer and S. Chatterjee and K. Damanakis and M. Dragicevic and {Del Valle}, {A. Escalante} and Hussain, {P. S.} and M. Jeitler and N. Krammer and L. Lechner and D. Liko and I. Mikulec and P. Paulitsch and Pitters, {F. M.} and J. Schieck and R. Sch{\"o}fbeck and D. Schwarz and S. Templ and W. Waltenberger and Wulz, {C. E.} and Darwish, {M. R.} and T. Janssen and T. Kello and {Rejeb Sfar}, H. and {Van Mechelen}, P. and Bols, {E. S.} and J. D{\textquoteright}Hondt and {De Moor}, A. and M. Delcourt and {El Faham}, H. and S. Lowette and S. Moortgat and A. Morton and D. M{\"u}ller and Sahasransu, {A. R.} and S. Tavernier and {Van Doninck}, W. and D. Vannerom and B. Clerbaux and {De Lentdecker}, G. and L. Favart and J. Jaramillo and K. Lee and M. Mahdavikhorrami and I. Makarenko and A. Malara and S. Paredes and A. Moraes",

year = "2024",

month = may,

day = "1",

doi = "10.1088/1748-0221/19/05/P05064",

language = "English",

volume = "19",

journal = "Journal of Instrumentation",

issn = "1748-0221",

number = "5",

}

TY - JOUR

T1 - Development of the CMS detector for the CERN LHC Run 3

AU - The CMS collaboration

AU - Tumasyan, A.

AU - Adam, W.

AU - Andrejkovic, J. W.

AU - Bergauer, T.

AU - Chatterjee, S.

AU - Damanakis, K.

AU - Dragicevic, M.

AU - Del Valle, A. Escalante

AU - Hussain, P. S.

AU - Jeitler, M.

AU - Krammer, N.

AU - Lechner, L.

AU - Liko, D.

AU - Mikulec, I.

AU - Paulitsch, P.

AU - Pitters, F. M.

AU - Schieck, J.

AU - Schöfbeck, R.

AU - Schwarz, D.

AU - Templ, S.

AU - Waltenberger, W.

AU - Wulz, C. E.

AU - Darwish, M. R.

AU - Janssen, T.

AU - Kello, T.

AU - Rejeb Sfar, H.

AU - Van Mechelen, P.

AU - Bols, E. S.

AU - D’Hondt, J.

AU - De Moor, A.

AU - Delcourt, M.

AU - El Faham, H.

AU - Lowette, S.

AU - Moortgat, S.

AU - Morton, A.

AU - Müller, D.

AU - Sahasransu, A. R.

AU - Tavernier, S.

AU - Van Doninck, W.

AU - Vannerom, D.

AU - Clerbaux, B.

AU - De Lentdecker, G.

AU - Favart, L.

AU - Jaramillo, J.

AU - Lee, K.

AU - Mahdavikhorrami, M.

AU - Makarenko, I.

AU - Malara, A.

AU - Paredes, S.

AU - Moraes, A.

PY - 2024/5/1

Y1 - 2024/5/1

N2 - Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.

AB - Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.

KW - Calorimeters

KW - Large detector systems for particle and astroparticle physics

KW - Particle tracking detectors

UR - http://www.scopus.com/inward/record.url?scp=85195241083&partnerID=8YFLogxK

U2 - 10.1088/1748-0221/19/05/P05064

DO - 10.1088/1748-0221/19/05/P05064

M3 - Article

AN - SCOPUS:85195241083

SN - 1748-0221

VL - 19

JO - Journal of Instrumentation

JF - Journal of Instrumentation

IS - 5

M1 - P05064

ER -

Development of the CMS detector for the CERN LHC Run 3

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this