The improvement of photovoltaic/wind hybrid system in perlis

Y. M. Irwan*, I. Daut, S. Ibrahim, N. Gomesh, M. Irwanto, M. Fitra

*Corresponding author for this work

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

Presently with the oil prices are on the rise, the cost of electrical power production is very high. The opportunity of a large photovoltaic/wind hybrid system (PWHS) power production is being explored. This paper presents the improvement of PWHS in Perlis, Northern of Malaysia. It is consists of cooling system for photovoltaic module and the combination method of Savonius and Darrieus for wind turbine. It is well known that the power and efficiency of photovoltaic (PV) module usually falls at the rate of ∼0.5%/°C and ∼0.05%/°C respectively as increase of ambient temperature. The electrical efficiency of PV cell depends on its operating temperature during absorption of solar radiation. For this reason, an active PV cooling system was design using the DC brushless fan with inlet/outlet manifold for uniform airflow distribution. It was attached at the back of the PV panel. Where else, the improvement of wind is using Vertical Axis Hybrid Wind Turbine (VAWT) through the combination method of Savonius and Darrieus types. From the results, it shows that the improvement of PWHS give the big advantages in term of supply the energy in Perlis.

Original languageEnglish
Pages (from-to)808-816
Number of pages9
JournalProcedia Engineering
Volume50
DOIs
Publication statusPublished - 2012
Externally publishedYes
Event2012 International Conference on Advances Science and Contemporary Engineering, ICASCE 2012 - Jakarta, Indonesia
Duration: 24 Oct 201225 Oct 2012

Keywords

  • Photovoltaic module
  • Photovoltaic/wind hybrid system
  • Wind energy

Fingerprint

Dive into the research topics of 'The improvement of photovoltaic/wind hybrid system in perlis'. Together they form a unique fingerprint.

Cite this