Multifunctional nanocomposites between natural rubber and polyvinyl pyrrolidone modified graphene

Xumin Zhang, Jingyi Wang, Hongbing Jia*, Shiyu You, Xiaogang Xiong, Lifeng Ding, Zhaodong Xu

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

69 Citations (Scopus)

Abstract

Polyvinyl pyrrolidone (PVP) modified reduced graphene oxide (PRGO) was prepared through chemical reduction of graphene oxide (GO) in the presence of PVP. The PRGO/natural rubber (NR) nanocomposites were fabricated by mixing PRGO aqueous dispersion with NR latex, followed by coagulation and vulcanization. The structure of PRGO was characterized using UV-vis absorption spectroscopy, Atomic force microscope, Solid state 13C NMR and X-ray photoelectron spectroscopy. The thermal conductivity, swelling and mechanical properties of PRGO/NR nanocomposites were also investigated. The results showed that GO was reduced effectively in the presence of PVP, and the PVP molecules were absorbed on the basal plane of reduced graphene oxide (RGO) through non-covalent interactions. With the increase of PRGO, thermal conductivity and storage modulus of PRGO/NR nanocomposites increased, whereas solvent uptake decreased. Compared with unfilled NR, NR with 5 phr (parts per hundred rubber) PRGO had a 30% increase in thermal conductivity and 37% decrease in solvent uptake. Under the condition of adding 3 phr PRGO, the tensile and tear strength of NR nanocomposite were improved by 23% and 150%, respectively.

Original languageEnglish
Pages (from-to)121-129
Number of pages9
JournalComposites Part B: Engineering
Volume84
DOIs
Publication statusPublished - 1 Jan 2016

Keywords

  • A. Polymer-matrix composites (PMCs)
  • B. Interface/interphase
  • B. Mechanical properties
  • B. Thermal properties

Cite this