Design and modeling of 1-phase induction motor using opera 2D software based on copper material

M. N. Syatirah; N. H. Halim; I. Daut; Y. Yanawati; S. Nor Shafiqin; N. Gomesh; M. Asri

doi:10.1109/PEOCO.2011.5970408

Design and modeling of 1-phase induction motor using opera 2D software based on copper material

M. N. Syatirah^*, N. H. Halim, I. Daut, Y. Yanawati, S. Nor Shafiqin, N. Gomesh, M. Asri

^*Corresponding author for this work

Research output: Chapter in Book or Report/Conference proceeding › Conference Proceeding › peer-review

2 Citations (Scopus)

Abstract

The paper presents the use of Opera 2D for designing and modeling of single phase induction motor with copper material. The materials are verified with the number of conductivity in the rotor bar. The winding calculation and the single phase winding are used for the circuit element in the program. The current, torque and magnetic are also taken into account. The complete model of the 1-phase 36/24slots, 4 pole, induction motor based on copper material presented in this study.

Original language	English
Title of host publication	2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts
Pages	193-196
Number of pages	4
DOIs	https://doi.org/10.1109/PEOCO.2011.5970408
Publication status	Published - 2011
Externally published	Yes
Event	2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Shah Alam, Selangor, Malaysia Duration: 6 Jun 2011 → 7 Jun 2011

Publication series

Name	2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts

Conference

Conference	2011 5th International Power Engineering and Optimization Conference, PEOCO 2011
Country/Territory	Malaysia
City	Shah Alam, Selangor
Period	6/06/11 → 7/06/11

Keywords

1-phase induction Motor
Opera 2D
Winding calculations

Access to Document

10.1109/PEOCO.2011.5970408

Cite this

Syatirah, M. N., Halim, N. H., Daut, I., Yanawati, Y., Nor Shafiqin, S., Gomesh, N., & Asri, M. (2011). Design and modeling of 1-phase induction motor using opera 2D software based on copper material. In 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts (pp. 193-196). Article 5970408 (2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts). https://doi.org/10.1109/PEOCO.2011.5970408

Syatirah, M. N. ; Halim, N. H. ; Daut, I. et al. / Design and modeling of 1-phase induction motor using opera 2D software based on copper material. 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts. 2011. pp. 193-196 (2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts).

@inproceedings{3ce4519ec5bb4b73a34c9eb8bc986002,

title = "Design and modeling of 1-phase induction motor using opera 2D software based on copper material",

abstract = "The paper presents the use of Opera 2D for designing and modeling of single phase induction motor with copper material. The materials are verified with the number of conductivity in the rotor bar. The winding calculation and the single phase winding are used for the circuit element in the program. The current, torque and magnetic are also taken into account. The complete model of the 1-phase 36/24slots, 4 pole, induction motor based on copper material presented in this study.",

keywords = "1-phase induction Motor, Opera 2D, Winding calculations",

author = "Syatirah, {M. N.} and Halim, {N. H.} and I. Daut and Y. Yanawati and {Nor Shafiqin}, S. and N. Gomesh and M. Asri",

year = "2011",

doi = "10.1109/PEOCO.2011.5970408",

language = "English",

isbn = "9781457703546",

series = "2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts",

pages = "193--196",

booktitle = "2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts",

note = "2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 ; Conference date: 06-06-2011 Through 07-06-2011",

}

Syatirah, MN, Halim, NH, Daut, I, Yanawati, Y, Nor Shafiqin, S, Gomesh, N & Asri, M 2011, Design and modeling of 1-phase induction motor using opera 2D software based on copper material. in 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts., 5970408, 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts, pp. 193-196, 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011, Shah Alam, Selangor, Malaysia, 6/06/11. https://doi.org/10.1109/PEOCO.2011.5970408

Design and modeling of 1-phase induction motor using opera 2D software based on copper material. / Syatirah, M. N.; Halim, N. H.; Daut, I. et al.
2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts. 2011. p. 193-196 5970408 (2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts).

Research output: Chapter in Book or Report/Conference proceeding › Conference Proceeding › peer-review

TY - GEN

T1 - Design and modeling of 1-phase induction motor using opera 2D software based on copper material

AU - Syatirah, M. N.

AU - Halim, N. H.

AU - Daut, I.

AU - Yanawati, Y.

AU - Nor Shafiqin, S.

AU - Gomesh, N.

AU - Asri, M.

PY - 2011

Y1 - 2011

N2 - The paper presents the use of Opera 2D for designing and modeling of single phase induction motor with copper material. The materials are verified with the number of conductivity in the rotor bar. The winding calculation and the single phase winding are used for the circuit element in the program. The current, torque and magnetic are also taken into account. The complete model of the 1-phase 36/24slots, 4 pole, induction motor based on copper material presented in this study.

AB - The paper presents the use of Opera 2D for designing and modeling of single phase induction motor with copper material. The materials are verified with the number of conductivity in the rotor bar. The winding calculation and the single phase winding are used for the circuit element in the program. The current, torque and magnetic are also taken into account. The complete model of the 1-phase 36/24slots, 4 pole, induction motor based on copper material presented in this study.

KW - 1-phase induction Motor

KW - Opera 2D

KW - Winding calculations

UR - http://www.scopus.com/inward/record.url?scp=80052290195&partnerID=8YFLogxK

U2 - 10.1109/PEOCO.2011.5970408

DO - 10.1109/PEOCO.2011.5970408

M3 - Conference Proceeding

AN - SCOPUS:80052290195

SN - 9781457703546

T3 - 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts

SP - 193

EP - 196

BT - 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts

T2 - 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011

Y2 - 6 June 2011 through 7 June 2011

ER -

Syatirah MN, Halim NH, Daut I, Yanawati Y, Nor Shafiqin S, Gomesh N et al. Design and modeling of 1-phase induction motor using opera 2D software based on copper material. In 2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts. 2011. p. 193-196. 5970408. (2011 5th International Power Engineering and Optimization Conference, PEOCO 2011 - Program and Abstracts). doi: 10.1109/PEOCO.2011.5970408

Design and modeling of 1-phase induction motor using opera 2D software based on copper material

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this