Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation

I. Daut; K. Anayet; N. Gomesh; M. Asri; Y. M. Irwan

doi:10.1109/ICCEE.2009.261

Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation

I. Daut^*, K. Anayet, N. Gomesh, M. Asri, Y. M. Irwan

^*Corresponding author for this work

Research output: Chapter in Book or Report/Conference proceeding › Conference Proceeding › peer-review

6 Citations (Scopus)

Abstract

It is generally assumed that copper rotor bars can outstand aluminium rotor bars in terms of better performance in losses reduction or money saving. This paper presents the comparison of the aluminium rotor bar and copper rotor bars designed by using FEM software to simulate the 0.5HP AC induction motor. The 0.5HP three phase induction motor is compared in terms of plot magnetic potential lines, eddy current density, magnetic flux density and lastly magnetic field strength. Analysis shows that the copper rotor bars have good performance in all the area that was investigated and thus lower the losses especially core and copper loss in the induction motor.

Original language	English
Title of host publication	2009 International Conference on Computer and Electrical Engineering, ICCEE 2009
Pages	456-459
Number of pages	4
DOIs	https://doi.org/10.1109/ICCEE.2009.261
Publication status	Published - 2009
Externally published	Yes
Event	2009 International Conference on Computer and Electrical Engineering, ICCEE 2009 - Dubai, United Arab Emirates Duration: 28 Dec 2009 → 30 Dec 2009

Publication series

Name	2009 International Conference on Computer and Electrical Engineering, ICCEE 2009
Volume	1

Conference

Conference	2009 International Conference on Computer and Electrical Engineering, ICCEE 2009
Country/Territory	United Arab Emirates
City	Dubai
Period	28/12/09 → 30/12/09

Keywords

Etc.
FEM
Inductionmotor
Magnetic field strength
Magneticflux density

Access to Document

10.1109/ICCEE.2009.261

Cite this

Daut, I., Anayet, K., Gomesh, N., Asri, M., & Irwan, Y. M. (2009). Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation. In 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009 (pp. 456-459). Article 5380451 (2009 International Conference on Computer and Electrical Engineering, ICCEE 2009; Vol. 1). https://doi.org/10.1109/ICCEE.2009.261

@inproceedings{b1e2622d1c6542658acc006aa3240a94,

title = "Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation",

abstract = "It is generally assumed that copper rotor bars can outstand aluminium rotor bars in terms of better performance in losses reduction or money saving. This paper presents the comparison of the aluminium rotor bar and copper rotor bars designed by using FEM software to simulate the 0.5HP AC induction motor. The 0.5HP three phase induction motor is compared in terms of plot magnetic potential lines, eddy current density, magnetic flux density and lastly magnetic field strength. Analysis shows that the copper rotor bars have good performance in all the area that was investigated and thus lower the losses especially core and copper loss in the induction motor.",

keywords = "Etc., FEM, Inductionmotor, Magnetic field strength, Magneticflux density",

author = "I. Daut and K. Anayet and N. Gomesh and M. Asri and Irwan, {Y. M.}",

year = "2009",

doi = "10.1109/ICCEE.2009.261",

language = "English",

isbn = "9780769539256",

series = "2009 International Conference on Computer and Electrical Engineering, ICCEE 2009",

pages = "456--459",

booktitle = "2009 International Conference on Computer and Electrical Engineering, ICCEE 2009",

note = "2009 International Conference on Computer and Electrical Engineering, ICCEE 2009 ; Conference date: 28-12-2009 Through 30-12-2009",

}

Daut, I, Anayet, K, Gomesh, N, Asri, M & Irwan, YM 2009, Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation. in 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009., 5380451, 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009, vol. 1, pp. 456-459, 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009, Dubai, United Arab Emirates, 28/12/09. https://doi.org/10.1109/ICCEE.2009.261

Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation. / Daut, I.; Anayet, K.; Gomesh, N. et al.
2009 International Conference on Computer and Electrical Engineering, ICCEE 2009. 2009. p. 456-459 5380451 (2009 International Conference on Computer and Electrical Engineering, ICCEE 2009; Vol. 1).

Research output: Chapter in Book or Report/Conference proceeding › Conference Proceeding › peer-review

TY - GEN

T1 - Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation

AU - Daut, I.

AU - Anayet, K.

AU - Gomesh, N.

AU - Asri, M.

AU - Irwan, Y. M.

PY - 2009

Y1 - 2009

N2 - It is generally assumed that copper rotor bars can outstand aluminium rotor bars in terms of better performance in losses reduction or money saving. This paper presents the comparison of the aluminium rotor bar and copper rotor bars designed by using FEM software to simulate the 0.5HP AC induction motor. The 0.5HP three phase induction motor is compared in terms of plot magnetic potential lines, eddy current density, magnetic flux density and lastly magnetic field strength. Analysis shows that the copper rotor bars have good performance in all the area that was investigated and thus lower the losses especially core and copper loss in the induction motor.

AB - It is generally assumed that copper rotor bars can outstand aluminium rotor bars in terms of better performance in losses reduction or money saving. This paper presents the comparison of the aluminium rotor bar and copper rotor bars designed by using FEM software to simulate the 0.5HP AC induction motor. The 0.5HP three phase induction motor is compared in terms of plot magnetic potential lines, eddy current density, magnetic flux density and lastly magnetic field strength. Analysis shows that the copper rotor bars have good performance in all the area that was investigated and thus lower the losses especially core and copper loss in the induction motor.

KW - Etc.

KW - FEM

KW - Inductionmotor

KW - Magnetic field strength

KW - Magneticflux density

UR - http://www.scopus.com/inward/record.url?scp=77950495087&partnerID=8YFLogxK

U2 - 10.1109/ICCEE.2009.261

DO - 10.1109/ICCEE.2009.261

M3 - Conference Proceeding

AN - SCOPUS:77950495087

SN - 9780769539256

T3 - 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009

SP - 456

EP - 459

BT - 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009

T2 - 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009

Y2 - 28 December 2009 through 30 December 2009

ER -

Daut I, Anayet K, Gomesh N, Asri M, Irwan YM. Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation. In 2009 International Conference on Computer and Electrical Engineering, ICCEE 2009. 2009. p. 456-459. 5380451. (2009 International Conference on Computer and Electrical Engineering, ICCEE 2009). doi: 10.1109/ICCEE.2009.261

Comparison of copper rotor bars with aluminium rotor bars using FEM software - A performance evaluation

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this