Skip to main navigation Skip to search Skip to main content

A multi-input, multi-output power management unit using dickson charge pump for energy harvesting applications

  • Abdulqader Mahmoud
  • , Mohammad Alhawari
  • , Baker Mohammad
  • , Hani Saleh
  • , Mohammed Ismail
  • Khalifa University of Science and Technology

Research output: Chapter in Book or Report/Conference proceeding › Conference Proceeding › peer-review

4 Citations (Scopus)

Abstract

This paper presents a multi-input, multi-output, frequency modulated Dickson charge pump targeting power management unit in energy harvesting applications. Four stages Dickson charge pump is designed and simulated using 65nm CMOS. The design has an input voltage range from 0.4V-0.6V and generates a regulated output voltage of 0.6V, 0.8V and 1V using pulse frequency modulation (PFM). SPICE simulations show that a maximum end-To-end efficiency of 33% at 200 μW at an input of 0.6V is achieved. The proposed charge pump supports a current range from 1uA to 200μA with a maximum operating frequency of 2.4 MHz. The proposed design could help in reducing the complexity of power management unit in energy harvesting applications.

Original languageEnglish
Title of host publication2016 IEEE 59th International Midwest Symposium on Circuits and Systems, MWSCAS 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781509009169
DOIs
Publication statusPublished - 2 Jul 2016
Externally publishedYes
Event59th IEEE International Midwest Symposium on Circuits and Systems, MWSCAS 2016 - Abu Dhabi, United Arab Emirates
Duration: 16 Oct 2016 → 19 Oct 2016

Publication series

NameMidwest Symposium on Circuits and Systems
Volume0
ISSN (Print)1548-3746

Conference

Conference59th IEEE International Midwest Symposium on Circuits and Systems, MWSCAS 2016
Country/TerritoryUnited Arab Emirates
CityAbu Dhabi
Period16/10/16 → 19/10/16

Keywords

  • Dickson charge pump
  • Energy harvesting
  • Frequency modulation
  • PMU

Cite this